Product Description

The OneTouch Select Test Strips are used with the OneTouch select simple blood glucose monitoring system for the quantitative measurement of glucose (sugar) in fresh capillary whole blood samples drawn from the fingertips. The OneTouch select blood glucose monitoring system is intended to be used by a single patient and should not be shared.

• Read the label carefully before use

• Store in a cool and dry place. Do not refrigerate

• Keep away from direct heat and sunlight

• Each strip is for single use only

• Keep out of the reach and sight of the children

• Dispose of the used strips properly

• Do not use if the expiry date has passed

• To be used within 6 months of opening the test strip vial

How to use

Read the user manual/instruction leaflet carefully before using the strips. However, here is a step-by-step guide you need to follow to check your blood glucose level at home with the help of a glucose monitor.

• The first step is to wash your hands with soap and water, pat-dry them with a towel. You can also use an alcohol swab to clean your finger before testing but ensure the fingertip is completely dry before you test

• Remove the diabetes test strip from the box of strips. Insert it into the slot on the glucometer just before you prick your finger

• Next, use a clean lancet (a device that holds the needle) or insert a clean needle in the lancet, which can help you to prick the end of your finger

• Prick the side of your fingertip and wait till blood oozes out. Wipe off the first drop gently and then put a drop or two onto the designated place on a test strip attached to the glucometer

• Hold a clean cotton pad or gauze on the prick site to stop blood flow. Apply pressure on the area of the insertion until the bleeding stops

• Your blood glucose level will appear on the meter’s display. Note down your readings as it helps you to monitor your glucose levels from time to time

• Repeat this procedure every time you test your blood glucose level

Storage

Store below 30℃